Decomin Microconcreto – Decorative Microcement

Price range: €75.00 through €200.00

A ready-to-use decorative microcement with a natural concrete-look finish and a tintable off-white base. Explore continuous surfaces for prepared walls, floors, ceilings and furniture, subject to the specified preparation and protection system.

4kg — €75 | 20kg — €200

Stir thoroughly before use. Contact us for sample options and project-specific application guidance.

Recommended primer: Use Decomin Quartz Primer with this textured finish, following the current product guidance for substrate preparation.

Description

Continuous concrete character for considered interiors

Decomin Microconcreto is a ready-to-use, single-component decorative microcement coating that creates a natural concrete-look surface. Its subtle tonal movement offers a refined starting point for residential and commercial design, from feature walls to coordinated architectural details.

Supplied in a tintable off-white base, Microconcreto can be coloured with suitable acrylic colourants. Application technique, preparation and lighting influence the final appearance: agree a sample before completing the full area.

Where to use Microconcreto

The product listing describes use on prepared walls, floors, ceilings and furniture. Confirm substrate compatibility and the complete coating and protective system for the intended location, particularly commercial floors, exterior exposure or wet areas.

The Amazon product guidance specifies AquaSHIELD protection for bathroom and shower applications. Water resistance of the decorative coating does not establish a complete waterproofing system; confirm preparation, waterproofing, protection and curing before installation.

Preparation and application

  1. Remove loose or peeling coatings and resolve surface defects. Clean and prepare a sound, smooth substrate.
  2. Apply the appropriate primer. The supplied technical sheet recommends Decomin Quarts Primer; confirm the correct primer for your substrate.
  3. The technical sheet specifies a six-hour interval after priming before the first coat. Apply using a steel trowel and allow the first coat to dry completely.
  4. Apply and work the second coat to achieve the agreed finish. Confirm coat thickness and the full application sequence for your project.
  5. Use the specified protective finish where required and allow the complete system to cure before use.

Product details

  • Pack sizes: 4kg and 20kg.
  • Format: ready-to-use, single-component decorative coating; stir thoroughly before use.
  • Base colour: off-white; tintable with suitable acrylic colourants.
  • Appearance: decorative concrete effect, shaped by application technique.
  • Technical sheet description: water-repellent and water-resistant coating.
  • Storage and application temperature: above +5°C, according to the supplied sheet.
  • Stated shelf life: two years; confirm storage requirements on the current packaging.

Coverage: contact Decomin Ireland for a project-specific quantity recommendation. Consumption depends on surface condition and application.

Plan your finish

Send your approximate area, photographs of the existing surface and the look you want to achieve. We can discuss sample options and the appropriate preparation and protective system.

Discuss your Microconcreto project

Application photographs

The gallery shows customer-supplied Microconcreto application photographs, including work in progress. Different surfaces and coatings may be visible within each photograph; use an agreed physical sample to assess the intended finish.

Microconcreto interior application overview, work in progress
Supplied Microconcreto application photograph — work in progress.
Microconcreto wall application detail, work in progress
Supplied Microconcreto application photograph — work in progress.
Microconcreto exterior application with scaffolding, work in progress
Supplied Microconcreto application photograph — work in progress.

Additional information

Pack size

4kg, 20kg