Description
Dekor decorative metallic varnish
Inchem Polonia Dekor is a water-based acrylic decorative lacquer that gives surfaces a metallic shimmer with a satin finish. Intended for indoor and outdoor decorative work, it offers UV resistance and good adhesion to correctly prepared substrates.
Available at Decomin: Gold, White and Black, 80 ml, €8 each. Manufacturer colour range also includes Antique Gold, Silver and Pearl.
Suitable uses
Use Dekor to highlight stuccowork, decorative mouldings, memorial stone lettering, glass, paper, cardboard, wood, metal, picture frames, seasonal decorations and decoupage projects. Test a small area before full application.
Technical specifications
- Type: water-based acrylic decorative lacquer
- Finish: satin metallic effect
- Pack: 80 ml
- Coverage: up to 10 m²/litre per coat (up to 0.8 m² per 80 ml coat)
- Coats: 1–2 depending on the desired effect
- Drying time: approximately 2 hours
- Initial hardness: about 24 hours
- Full strength: allow around 7 days before cleaning or exposing to water, dirt or wear
- Temperature: +10°C to +30°C
- Relative humidity: below 70%
- Shelf life: 36 months from production
How to apply
- Clean the surface thoroughly of dust, dirt, grease and loose old coatings. Ensure it is dry.
- Shake the bottle thoroughly and stir the lacquer regularly during application.
- Apply the first coat using a brush, sponge or roller, as appropriate for the desired finish.
- Allow the coating to dry (approximately 2 hours, depending on temperature and humidity) before applying another coat.
- Protect from moisture, dirt and abrasion while curing; allow about seven days before cleaning.
- Wash equipment promptly using water and detergent.
Drying times depend on application conditions.
Technical Data Sheet (English): View or download the Dekor Technical Data Sheet (PDF).
Open English Technical Data Sheet (PDF)
Frequently asked questions
What is Dekor decorative varnish used for?
It creates a decorative metallic satin effect on stucco details, wood, metal, glass, paper, cardboard, picture frames, lettering and decoupage projects.
Is Dekor suitable for exterior use?
Yes. The manufacturer specifies indoor and outdoor decorative uses and describes the coating as UV resistant.
How many coats do I need?
Apply 1 or 2 coats depending on the desired finish. Allow approximately 2 hours for drying, depending on conditions.
How far will one 80 ml bottle go?
At up to 10 m² per litre, an 80 ml bottle covers up to 0.8 m² in one coat or approximately 0.4 m² with two coats. Actual coverage varies with substrate and technique.
What preparation is required?
Ensure the substrate is clean, dry, free of grease and loose coatings. Shake the bottle before use and stir regularly.
How long does Dekor take to dry?
Initial coating hardness is typically reached after about 24 hours. Protect the finish from cleaning, moisture, dirt and abrasion for approximately seven days while it reaches full strength.
What colours are available?
Decomin currently offers Gold, White and Black. Inchem also manufactures Antique Gold, Silver and Pearl.
What are the recommended application conditions?
Apply at +10°C to +30°C with air humidity below 70%. Clean tools with water and detergent immediately afterwards.
