Inchem Grunt MIX Primer 1 L

€15.00

Single-component primer for preparing interior and exterior building surfaces before painting or plastering. 1 L; colourless and tintable; covers approximately 10–15 m² per coat.

Description

Grunt MIX is a single-component, water-based primer based on fine-particle synthetic resins. It prepares building surfaces before painting or plastering, helps strengthen the substrate, reduces absorbency and dusting, improves adhesion and helps reduce patchiness and paint consumption. Colourless; may be tinted with pigment.

Suitable surfaces and use

For raw concrete, cement, cement-lime and gypsum substrates, microcement, and previously painted surfaces that have deteriorated. Suitable indoors and outdoors, including underfloor-heating systems. It can be used beneath water-based façade paints, acrylic renders and interior paints.

Application

  • Coverage: approximately 10–15 m²/L for one coat, depending on substrate absorbency and application method.
  • Apply 1–2 coats; one coat is usually sufficient. Very absorbent or weak surfaces may need a second coat, applied wet-on-wet. Do not double-prime beneath self-levelling floors.
  • Apply by brush, roller or spray. Do not dilute. For gypsum substrates, Inchem recommends mixing the primer with paint at 1:1.
  • Drying time: approximately 2 hours, depending on temperature and humidity.
  • Application conditions: +10°C to +30°C and relative humidity below 70%.

Preparation and storage

Use on a dry, clean, degreased surface. Remove loose or poorly bonded layers. Mix thoroughly before use. Store in the original sealed container at +5°C to +40°C and protect from frost. Shelf life is 36 months from production; use within 6 months of opening. Wash tools with water and detergent after use.

Product information: Inchem Polonia Grunt MIX Primer.

Technical data sheet (Polish PDF): GRUNT technical data sheet.